CRANE TYPE FIVE AXIS LINKAGE GANTRY HIGH-SPEED MACHINING CENTER (XY EQUIPPED WITHHIGH-SPEED LINEARMOTOR)

I want to make an inquiry

FEATURES
X/Y-axis linear motor direct drive Fast feed rate up to 60m/min No backlash, no wear, permanent accuracy High speed, high thrust, high acceleration/deceleration Transmission mechanism without gear and rack wear Simple structure and low maintenance cost Subtract the roller screw and nut coupling
MAIN TECHNICAL PARAMETERS
PROJECT			Main parameters
Processing range	X-axis travel	mm	3000
	Y-axis travel	mm	2000
	Z-axis travel	mm	1200
	Longmen span	mm	2550
	Distance from spindle end face to worktable	mm	200–1400
Workbench	Size (length x width)	mm	2700×1800
Workbench	T-shaped groove size/spacing	PCS	22/250
Three-axis screw	X	mm	linear motor×2
	Y		linear motor
	Z	mm	Φ63
Three axis roller guide rail	X		4 pieces of 45 rails,a total of 16 sliders
	Y		3 pieces of 55 rails,a total of 8 sliders
	Z		4 pieces of 55 rails,a total of 16 sliders
Three-axis grating ruler	X(2 pieces)		FORTIS 3040C 2DS 5UM
	Y		FORTIS 2040C 2DS 5UM
	Z		FORTIS 1240C 2DS 5UM
A,C-five axis swing head	Spindle speed	rpm	HSK-A63/HSK-A100 Optional
	Spindle taper		18000/12000 Optional
	A,C-axis rotation angle	mm	±110°/±360°
	Spindle power,torque		30Kw/100Nm
	A-axis positioning,repeated positioning accuracy		8′/4′
Z-Axis balance			Dual balanced cylinder+nitrogen cylinder
Chip removal device			Double screw row+water tank
Feed drive	X,Y,Z rapid traverse speed	m/min	30/30/10
Feed drive	X,Y,Z Feed rate	m/min	15/15/6
CNC system			Siemens 828D - 290(3+2) system
Motor power		kw	7.7×4
Total weight		T	35
Dimensions (Length x Width x Height)		mm	5500×4350×3600